|Flashing light uses triacs Schematic|
Saturday, April 14, 2012
This flashing light circuit uses triacs to generate an intermittent light with patchy frequency. extra components are the D1 diode and semi modifiable potentiometer R2. The trigger capacitor C1 is increased from 0.1 µF to 220 µF so to the triacs can be real prepared pro several successive periods. C1′s loading measure is longer, so to the lamp flashes with single pause of several periods.
Blinking frequency can be adjusted with P1. Semi-adaptable potentiometer R2 regulates the current gate. This setting affects the lighting duration of the lamp since it moreover find out the C1′s discharging spell.
Electronic Circuit is a good site for hobbyist also who would like to try DIY because it shared good circuits. If you have a personalized circuit requirement you may feel free to request it through the comment box or contact me.