Skip to content Skip to sidebar Skip to footer

TL494 DC TO DC STEP UP 12V TO 40-90VDC CT

TL494 DC TO DC STEP UP 12V TO 40-90VDC CT

Hello friends, on this occasion I will share a complete schematic and PCB layout with BOM files and CPL files for the DC to DC 12VDC to 40-90VDC Converter kit which can adjust to the twisted step-up transformer. Here is a DC to DC Converter scheme using IC TL494 with 8 mosfet IRB4110.

TL494 DC TO DC STEP UP 12V TO 40-90VDC CT
For the transformer, you can use the ferrite EE55 transformer which is rolled using an email hook.
For the primer, use a wire with a diameter of 0.8mm, as much as 7 copies, wound 3 + 3 times.
And the secondary uses 3-fold 0.8mm wire wrapped around 22 times for the CT 90VDC voltage.

To make it easier, elcircuit.com provides its PCB Layout which you can download at the end of the post.

DC TO DC COnverter

Download:


13 comments for "TL494 DC TO DC STEP UP 12V TO 40-90VDC CT"

  1. What is the output power of converter?

    ReplyDelete
  2. Halo teman saya membutuhkan catu daya papan PCB untuk model otomotif 12V ini,
    lihat spesifikasinya di tautan.

    Jika Anda tertarik untuk mengembangkan proyek untuk saya
    alamat email saya- [email protected]
    membayar biaya pengembangan proyek beri tahu saya jika Anda memiliki bunga yang saya bayarkan dalam dolar.

    https://smunchina.en.made-in-china.com/product/VNuJDlkrJLWA/China-Smun-S-201-12-201W-12V-16-5A-Open-Frame-Power-Supply-PCB.html
    https://www.youtube.com/watch?v=_sRAqrHrdpA
    https://produto.mercadolivre.com.br/MLB-1254437743-fonte-automotiva-chaveada-138-v-90-amperes-extensao-cabo-_JM

    ReplyDelete
  3. Where is pcb layout file ...

    ReplyDelete
  4. Very nice and powerfull project. Can you send me Pcb file ,please?

    [email protected]

    ReplyDelete
  5. Excelente trabajo gracias, saludo desde Colombia

    ReplyDelete
  6. Can you share with me the design file in a format that software like eagle, altilum... can edit, sir?
    thank you

    ReplyDelete
  7. Can you share with me the design file in a format that software like eagle, altilum... can edit, sir?
    thank you

    ReplyDelete
  8. Can you share with me the design file in a format that software like eagle, altilum... can edit, sir?
    thank you

    ReplyDelete
  9. Can you send me pdf version of pcb pls since der is no available of pcb shipping

    ReplyDelete