Skip to content Skip to sidebar Skip to footer

1000W Power Amplifier Class H Kencleng Pro

1000W Power Amplifier Class H Kencleng Pro, This is a power amplifier with class H topology, see more about what class H amplifier is here:
And this time I will share Gerber files for this class H amplifier, this power amplifier is very powerful, very suitable for use in the field. With a maximum power of up to 1000W on a 4 Ohm load, amplifiers are indeed intended for large sound systems. Besides having a large enough power this amplifier also has good sound quality, can be used for woofers, subwoofers or midrange speakers. The recommended power supply for MV is 70V and HV 140V DC, with a minimum current of 20A.

The following is a Gerber file viewer image, with a double side layout. You can download the Gerber file at the end of the post.
1000W Power Amplifier Class H Kencleng Pro
Download
Gerber 1000W Power Amplifier Class H Kencleng Pro

9 comments for "1000W Power Amplifier Class H Kencleng Pro"

  1. amigo tienes por hay el diagrama electrico gracias

    ReplyDelete
  2. I can't open it. because the file formar was compressed to rar.

    ReplyDelete
  3. please free to open the file...

    ReplyDelete

  4. Sir do u have this pcb? If have then I want to buy this pcb... please reply soon. my contact no-7076260454

    ReplyDelete
  5. go to https://gerber-viewer.easyeda.com/ and upload gerber file
    or jlcpcb.com to order

    ReplyDelete
  6. I had the boards in jlcpcb, but there is an error in the output relay is connected with gnd and has no value of trimpots.

    ReplyDelete
  7. This comment has been removed by a blog administrator.

    ReplyDelete
  8. This comment has been removed by a blog administrator.

    ReplyDelete
  9. Need this pcb

    ReplyDelete