For Gerber files needed for the process of making PCB D4K5 class-d amplifiers, you can see the amplifier scheme here: 4500W High Power Class-D Amplifier D4K5, There are so many DIY'ers friends requesting this D4K5 Class-D PCB file, Download the Gerber file at the very bottom of this post. And before you download this D4K5 PCB D-class.
I will share tips on how to order PCB on JLCPCB by using a PCB d4k5 Gerber file. Here's how to order in JLCPCB:
1. At first, visit JLCPCB (https://jlcpcb.com/) then register the account or log in if you already have a JLCPCB account.
4. Select the file D4K5 - CADCAM file that has been downloaded.
5. Click Open and please wait for file uploading.
After Gerber file uploaded you can see the PCB Layout and see PCB dimensions automatically.
Select the PCB option as shown below or as you wish, you can change the PCB color, PCB thickness, etc.
10. Fill in the form according to your shipping address.
11. Then click Checkout, after you choose shipping courier and choose a payment method.
13. And when the review is complete you can pay for the next process of making PCB and shipping to your address.
Example of a package box JLCPCB
This PCB Power Amplifier CLass-D D4K5 ordered at JLCPCB.com
DOWNLOAD
Video Assembling and Test
36 Comments
hi wahyu, so many files, what specific file I upload to JLCPCB?
Nice bro
Gerber file bro
This work also bro. And i will update in my youtube
Hi sir what is the use/pupose of the trimmer located at the right side of ic cd4049, can you tell me how and when to adjust this trimmer?
Trimmer adjust current limit protection,
Thanks bro
After some time the mosfet shorted what is the problem
RV1 = 10K Trimpot
How do I make adjustments?
Please tell me how to make adjustments.
thanks
check the IR IC is original or not
set the trimpot into minimum and you can see the led will blinks some times you add more gain. and if led protec on amplifier will off
Thank you for your help.
Good article.
vip2541
hero88
Bro can u give me link for buying gacun kit
Good work lot's of help from this page keep it up cheers ...
thanks
We finished the PCB production and today we tested the sound.
The sound was powerful and sounded very appealing.
However, the coil generates a lot of heat.
Is it normal to generate heat?
Hi Bro how much price of this super class-D ? I want this i can't find all this components that's why asking the price if i can affordable then i'll sure buy it thank you : )
I have tested the amp sound power is greater than class ab.
Wahyu Eko Romadhon Nice to meet you.
I would like to purchase the power supply you used to test the amplifier ......
Please tell us the route you can buy.
nice,thank you bro
I ned 2 PCB,
you can order at jlcpcb
I want to pay the PCB and the shipping in advance, but there is no such option. I'm not always personally at the address
Was capacitor 220uF 16v turned upside down? In the old version of our standing around? How should stand?
HI, Gerber File-D D4K5 not faund, error 404,
reload file,
thank
What is RMS voltage/ohm load of 4k5 amp giving?
I could not download the gerber file. Can anybody send me the file-D D4K5? My e-mail mkz.shawon@gmail.com
Is it smd components board
I could not download the gerber file. Can anybody send me the file-D D4K5? My e-mail vadimstrdbts@gmail.com
Wes Rame....kebagian ora iki PCB ne hahahahaha....tingak tinguk wess 🤣🤣🤣
EmoticonEmoticon