Skip to content Skip to sidebar Skip to footer

Crazy Sound 1700W Power Amplifier Circuit

Not the one with the title of this post, why crazy sound ? Because of circuit power amplfier is really crazy, sound is powerful. By having a power output of 1700W Mono at 8 Ohm load with power supply voltage of around 110VDC. This power amplifier have featured Indicator clip and speaker protector circuit. Final transistor using Sanken C3264 and A1295. Bellow the circuit schematic and PCB Layout.

Crazy Sound 1700W Power Amplifier Circuit Diagram
1700W power amplifier crazy sound output

For the initial setup, VR-2 at the position to the left of the VR-1 at the center position. Then the VR-1 setup. Avometer position in DC volts, Avo + to the speaker avo - to ground. Up to 0 Volt. After the VR-2, from a base Sanken SC (NPN) to the base of Sanken SA (PNP). avo + to base SC and avo - to base SA, max voltage should be 1 volt.

PCB Crazy Sound 1700W Power Amplifier Circuit 
PCB 1700W Power Amplifier
PCB Layout power amplifier 1700W

7 comments for "Crazy Sound 1700W Power Amplifier Circuit "

  1. This comment has been removed by the author.

    ReplyDelete
  2. sir do you have the circuit diagram of the speaker protector only

    ReplyDelete
    Replies
    1. you can search in this site by using search box on side bar,

      Delete
  3. Sir, just want to ask of all the power amplifier you have shared which one is the most very loud bass for outdoor?

    ReplyDelete
  4. sir please explain vr1 and vr2 simple adjustments. i can't understand this pls help me. i already made it.

    ReplyDelete
  5. http://www.lzzgchina.com/washing-plant/ provide the one step washing plants for the customers allover the world! Our washing plants for sale are capable of processing 30-400 tonnes/h of quarried sand and gravel feed materials to produce a variety of different standard aggregates and sand.

    ReplyDelete
  6. JingHongYi PCB, a professional China PCB manufacturer, special multilayer PCB, 6 layer PCB, 6 layer PCB stackup.

    ReplyDelete