Skip to content Skip to sidebar Skip to footer

X10 Blazer Power Amplifier 1000 Watt Mono [ KIT ]

X10 Blazer 1000 Watt Power Amplifier accompanied by highly qualified components, consisting of 5 sets (10 pieces transistor) final transistor SANKEN original and charming using fiber PCB.
Blazer X10 1000 Watt Power Amplifier is also equipped with a speakers protective circuit using OMRON relay, so you do not need to add speakers protector separately.
Advantages X10:

X10 Blazer Power Amplifier 1000 Watt Mono

Specification X10 Blazer 1000 Watt Power Amplifier:
  • Output power: 1000 watts RMS into 4 ohms, 800 watts RMS into 8 ohms
  • Frequency Response: 7 Hz to 56 Khz at +0 dB-3dB
  • Input Sensitivity 1.2 Volts RMS (for 300 watts into 4 ohms)
  • Harmonic Distortion: 0.06% from 20 Hz to 20Khz, Typically 0.004%
  • Signal to noise ration: 122 db unweighted (20 Hz to 20 Khz), 122 db A-weighted
  • Damping factor: 200 (for 8 ohms loads)
  • Stability: Unconditional
Buy X10 Blazer Power Amplifier 1000 Watt Mono : audiorakitan 

5 comments for "X10 Blazer Power Amplifier 1000 Watt Mono [ KIT ]"

  1. sir welcome we want this power amp kit also

    ReplyDelete
  2. Dear Mr.Wahyu

    one more question how many volts DC the compatible for this amplifier kit

    thanks Mr.Wahyu for the cooperation

    ReplyDelete
  3. Hello Henry,

    This kit amplifier is compatible with source voltage about 20V up to 90V DC.
    But the recomended voltage power source is 75VDC with amperage rating 20A, it can give high performance into your speaker.

    Thanks

    ReplyDelete